WILD

Gestione Integrata di Sistemi Produttivi Interagenti: Metodi Quantiativi Avanzati per la Quick Response

Project Sponsored by MIUR

Scientific References

 

  1. Adani M., Angellara S., Chessa M., "The supply chain management: a conceptual framework and an empirical evaluation", tesi di laurea, Politecnico di Milano, 1998

  2. Alford D., Sackett P., Nelder G.; "Mass customizationan automative perspective"; Int. Production Economics 65 (2000) 99-100, Elsevier: Bedfordshire (UK).

  3. Ames A.L., Nadeau D, Moreland J. (1996) "The VRML Sourcebook", John Wiley & Sons, NYC
  4. Arizono I., Yamamoto A., Ohta H., "Scheduling for Minimizing Total Actual Flow by Neural Networks", Int. Journal of Production Research, vol. 30 n. 3, 1992, pp. 503-511
  5. Aucamp, D.C., (1987), "A lot-sizing policy for production planning with application in MRP", Int. J. Prod. Res., Vol. 25, pp. 1099-1108

  6. Baker, A.D. (1998). "A survey of factory control algorithms which can be implemented in a multi-agent heterarchy: dispatching, scheduling and pull". Journal of Manufacturing Systems, 17 (4) : 297-320.

  7. Bakos Y.; "Information links and electronic marketplaces: the role of InterOrganizational Information Systems in vertical markets"; Journal of Management Information Systems, Fall 1991.

  8. Banks J., Carson J., Nelson B. 1996, "Discrete-Event System Simulation", Second Edition, Prentice Hall

  9. Barret S. S., Konsynski B.; "Interorganizational Information Sharing Systems"; MIS Quarterly, 1982.

  10. Bartolotta A., Corradi E., Garetti M. (1999) Developing an ontology for the modelling of manufacturing systems. Proceeding of IEMC99, Verdal, Norvay June 14-16.

  11. Bartolotta A., Garetti M.; "Object-oriented representation of manufacturing systems: trends and perspectives"; Proceedings of the advanced in production management systems conference IFIP, Kioto.

  12. Bartolotta, E. Corradi and M. Garetti, "Utilizzo della metodologia object-oriented per la descrizione dei Sistemi produttivi", Proceedings of the XXV Conference ANIMP, Sorrento, 23-25 Ottobre 1997
  13. Bel G., Perona M., Sianesi, A., Thierry C., "The Multi-Site Production Management Problem: Mathematical Formalization and Prototype Development", 10th Int.Conf. on Computer Aided Production Engineering, Palermo, 7/9-giugno-1994

  14. Benedettini O., R. Iavagnilio, G. Mossa, G. Mummolo, L. Ranieri, "Integrating Resource Allocation and Simulation in Project-type Production Planning and Control of Supply Chains: A Case from the Aeronautics Industry, Special Interest Group (SIG) on "Advanced Techniques in Production Planning and Control" 28-29 August 2001, Aalborg, Denmark.

  15. Bertolini F., Bruzzone A.G., Merlino M., Mosca R., Testa, S. Tremori R. 1997) "Intelligent Warehouse & Simulation Modellingfor Industrial Facilities: Technique & Managers Waking", Proc. of Summer Computer Simulation '97, Arlington, July 13-17

  16. Bettini G., Rapaccini M., Tucci M., "Automatic modelling of manufacturing systems with conventional stochastic discrete events simulation languages", Proceedings of 9th European Simulation Symposium ESS, Passau (D), 19-22 October 1997, pp. 411-415, ISBN 1-56555-125-7

  17. Bettini G., Tucci M., Rapaccini M., "A Taxonomy of PPC Methodologies: A step towards advanced simulation tools", Proceedings of 2nd IFIP WG5.7 Special Interest Group on Advanced Technique in Production Planning and Control, Hanover (D), 11-12 February 1999, pp. 53-56

  18. Booch G (1994) "Object-Oriented Analysis and Design", Addison Wesley, Menlo Park, CA

  19. Booch G., Rumbaugh J., Jacobson I. (1999). "The unified modeling language user guide", Addison-Wesley.

  20. Bowersox D. J., Closs D. J.; "Logistical Management: the Integrated Supply Chain Process"; Mc Graw-Hill: New York, 1996.

  21. Brandolese A., Brugger G., Misul M.; "Analisi dei sistemi di produzione manufatturiera"; Finanza, Marketing e Produzione, n. 1, marzo 1985.

  22. Brandolese M., M. Franci, A. Pozzetti, "Production and maintenance Integrated Planning", International journal of Production Research, Vol. 34, No. 7, 1996

  23. Brandolese, A., Brun, A., Portioli, A., "A Multi-Agent approach for the Capacity Allocation Problem", International Journal of Production Economics, 166 (2000): 269-285.

  24. Brun, A., "Approcci distribuiti alla pianificazione della Supply Chain", Tesi di Dottorato, Politecnico di Milano, Dicembre 2000.

  25. Brun, A., Caridi, M., "Mixed-Model Final Assembly Line Scheduling by mean of a Virtual Ants Colony", in Abstract Proceedings of ANTS’2000 – from Ant Colonies to Artificial Ants: Second International Workshop on Ant Algorithms, Bruxelles, 7-9 Settembre 2000

  26. Brun, A., Caridi, M., "The mixed-model assembling lines balancing problem: yet another application of the ant-system paradigm", in Proceedings of the CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Capri, 1-3 Luglio, 1998.

  27. Brun, A., Caridi, M., Cavalieri, S. et al (1998). "Progetto COSPI: modellazione e sviluppo di un sistema di gestione della produzione basato su agenti autonomi". Atti del XXV Convegno Nazionale di Impiantistica Industriale., pag. 287 - 312. Bologna, 29 - 31 Ottobre

  28. Brun, A., Caridi, M., Macchi, M., Massè, M., "An agent-based short-term production scheduling and control system", in Atti del VI Congress of IA*AI, Bologna, 15-17 Settembre 1999

  29. Brun, A., Giambruno, P., "APS: l’arte di gestire la Supply Chain", Computerworld Italia, 29 maggio2000

  30. Brun, A., Portioli, A. "Un’applicazione dei sistemi multi-agente alla programmazione della produzione nei sistemi multilivello", Atti del XXV Convegno Nazionale ANIMP - OICE – UAMI, Bologna, 29-31 Ottobre, 1998.

  31. Brun, A., Portioli, A., "Agent-based shop-floor control systems: solving the assemblies co-ordination problem", Proceedings of the CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Capri, 1-3 Luglio, 1998.

  32. Brun, A., Portioli, A., "Agent-based shop-floor scheduling of multi-stage systems", Computers & Industrial Engineering, Vol. 37, n. 1-2, 457-460, 1999.

  33. Brun, A., Portioli, A., "Effective Supply Chain Co-ordination: an investigation", in Proceedings of the Second International Workshop on Intelligent Manufacturing Systems, Leuven, Belgio, 22-24 Settembre, 1999

  34. Brun, A., Portioli-Staudacher, A., "Negotiation-Driven supply Chain Co-ordination for Small and Medium Enterprises", ECAI Workshop Notes – Agent Technologies and Their Application Scenarios in Logistics - 14th European Conference on Artificial Intelligence, Berlino, 20-25 Agosto 2000

  35. Brun, A., Portioli-Staudacher, A., "Utilizzo di Agenti Autonomi per la gestione integrata della Supply Chain – una analisi sperimentale per la filiera tessile", Atti del XXVII Convegno Nazionale ANIMP – OICE – UAMI, Trieste, 12-13 Ottobre, 2000.

  36. Bruzzone A.G., Mosca R., Revetria R. (2001) "Gestione Integrata di Sistemi Produttivi Interagenti: Metodi Quantitativi Avanzati per la Quick Response: Compedium", DIP, Genoa, ISBN 88-900732-0-9
  37. Bruzzone A.G., Fassone B., Giribone P., Mosca M. (1998) "Project Management Tools: Simulation On Web Environment", Proceedings of Websim99, San Diego January

  38. Bruzzone A.G., Giribone P. 1998 "Decision-Support Systems and Simulation for Logistics: Moving Forward for a Distributed, Real-Time, Interactive Simulation Environment", Proceedings of the Annual Simulation Symposium IEEE, Boston, 4-9 April

  39. Bruzzone A.G., Giribone P., Revetria R. (1999) "Design and management issues in the development of the new workshops using web-based simulation and neural networks", Proceedings of FAIM’99, pp. 265-276 Tilburg (NE), June 23-25

  40. Bruzzone A.G., Giribone P., Revetria R. 1999, "Design and management issues in the development of the new workshops using web-based simulation and neural networks", Proceedings of FAIM’99, pp. 265-276 Tilburg (NE), June 23-25

  41. Bruzzone A.G., Kerckhoffs (1996) "Simulation in Industry: 8th European Simulation Simposium", Genoa, Italy, October, Vol. I & II, ISBN 1-56555-099-4
  42. Bruzzone A.G., Mosca R. (1999) "Modelling & Simulation & ERP Systems For Supporting Logistics in Retail", Proceedings of ESS99, Erlangen, October

  43. Bruzzone A.G., P. Giribone, "Robust and Central Composite Design as Collaborative Techniques for Production Planning Using Simulation", Proc. of EUROSIM ’98, Helsinky, April 1998.

  44. Bruzzone A.G., P. Giribone, "Simulating Assembly Processes in Automotive Support Industries for Production and Design Improvement", Proc. of XV Simulator International, Boston, 1998.

  45. Bruzzone A.G., P. Giribone, "The Identification of Critical Conditions in Total Quality Management for Assembling Industry", Proc. of Summer Computer Simulation Conference, Reno, July 1998.

  46. Bruzzone A.G., P. Giribone, "The Solution to the Problem "WHY?" Applied to Industiral Production: the Key to Success for Total Quality Management", Proc. of ToolMet ’98, Olulu, April 1998.

  47. Bruzzone A.G., Page E.H., Uhrmacher A. (1999) "Web Based Modelling & Simulation", SCS, San Diego, ISBN 1-56555-156-7

  48. Bruzzone A.G., Revetria R., Merkuryev Y., Merkurieva G., Diglio G. (2001) "Advances In Hla Based Education For Supply Chain Management", Proceedings of HMS2001, Marseille, October

  49. Bruzzone A.G., Revetria R., Orsoni A. (2001) "Framework Development For Web-Based Simulation Applied To Supply Chain Management", Proceeding UKSim, Cambridge

  50. Buzzone A.G., Roberto Revetria, Flavio Tonelli, Diglio G., Vigano’G. (2001) "Advanced Issues in Distributed Verification and Validation Process for Supply Chain Management Simulator", Proceedings of HMS2001, Marseille, October

  51. Cadenhead R., "Java 1.2, SAMS Teach Yourself Java 1.2", Sams Publishing, 1998.

  52. Carbone A., A.G. Bruzzone, P. Giribone, "Harbour Services and Lay-Out Re-Engineering by Using Simulation", Proc. of 1st Workshop on Modelling & Simulation within a Maritime Enviroment, Riga, Latvia, September, 1998

  53. Carey R., Bell G. (1997) "The annotated VRML 2.0 Reference Manual", Addison Wesley, Reading MA
  54. Cavalieri, S., Taisch, M., Garetti, M. (1998) "An experimental benchmarking of two multiagent systems for production scheduling and control", Proceedings of the First International Workshop on Intelligent Manufacturing Systems, pag. 133 - 154. Lausanne, April 15-17

  55. Chaib-Draa, B. (1996), "Interactions between agents in routine, familiar, and unfamiliar situation", International Journal of Cooperative Information Systems, Vol.5(1)

  56. Cheli E., Bettini G., Tucci M., Rapaccini M., "Toward integrated simulators. First step: please pass the data", Proceedings of 3rd IFIP WG5.7 Special Interest Group on Advanced Technique in Production Planning and Control, Florence (I), 24-25 February 2000, atti non ancora pubblicati

  57. Cigolini, R., Perona, M., e Portioli, A. (1998). "Comparison of Order Review and Release techniques in a dynamic and uncertain job shop environment", International Journal of Production Research (di prossima pubblicazione).

  58. Clearwater, S.H., Huberman, B.A., e Hogg, T. (1991). "Co-operative solution of constraint satisfaction problem", Science, Vol.254, pp.1181-1183

  59. Cornell G., Horstmann C.S. (1997) "Core Java", SunSoft Press, Mountain View, CA
  60. Corradi, A. Bartolotta, M. Garetti, M. Rabe, A. Raimondo, "Manufacturing Systems Engineering for the Extended Enterprise", Proceedings of the Conference Organizing the Extended Enterprise, Ascona, 15-18 Settembre 1997

  61. Cozzi M., "Supply Chain Strategies", tesi di laurea, Politecnico di Milano, 1999

  62. Croci F., A. Pozzetti, "OPT scheduling performances: a case study", in corso di pubblicazione su Production Planning & Control
  63. Croci F., A. Pozzetti, "Range and mix flexibility performance measurements", 1st International Conference on Managing Enterprises - Stakeholders, Engineering, Logistics and Achievement,Loughborough, luglio 1997
  64. Croci F., M. Perona, A. Pozzetti, "Event driven dynamic scheduling system in electronic boards assembly", 12th International Conference on CAD/CAM Robotics and Factories of the Future, London, agosto 1996
  65. Croci F., M. Perona, A. Pozzetti, "Work-force management in automated assembly systems", International Conference on Industrial Engineering and Production Management, Lyon, ottobre 1997

  66. Dahmann J.; "HLA Tutorial"; Simulation Interoperability Workshop, Spring 1997.

  67. Davis, R., e Smith, R.G. (1983). "Negotiation as a metaphor for distributed problem solving", Artificial Intelligence, Vol. 20, pp. 63-109.

  68. Decker, K.S. (1995). Environment Centered Analysis and Design of Co-ordination Mechanisms, PhD Thesis, University of Massachusets, Amherst.

  69. Dewar J.A., Bankes S.C., Hodges J.S. "Credible Uses of the Distributed Interactive Simulation (Dis) System", the Lucas Rand Corporation; ISBN: 0833023039

  70. Di Leva A., La logistica integrata e i sistemi ERP in imprese multinazionali ,Tesi di Dottorato di Ricerca in Ingegneria dei Sistemi Avanzati di Produzione, XIII ciclo, Dipartimento di Ingegneria Meccanica e Gestionale, marzo 2001.

  71. Di Leva A., M. G. Gnoni, G. Mossa, G. Mummolo, Pianificazione integrata della catena logistica di un'azienda multi-site del comparto meccanico-manifatturiero. Conferenza Italian Society for Computer Simulation, Lecce 15 Dicembre 2000.

  72. Dilts, D.M., Boyd, N.P., e Whorms, H.H. (1991). The evolution of control architectures for automated manufacturing Systems, Journal of Manufacturing Systems, Vol.10, No.1.

  73. Doumeingts G., Ducq Y., Kromm H. (1999). Enterprise modelling techniques to improve efficiency of enterprise. Proceeding of IEMC99, Verdal, Norvay June 14-16.

  74. Enslow, P.H. (1976). What does distributed processing mean. Distributed Systems, Infotech state of the art report, Maidenhead, UK.

  75. Fishwick, P. (1995) "Simulation Model Design and Execution", Prentice Hall, New Jersey

  76. Fogarty D. W.; "Production and Inventory Management"; South Western Publishing Co., Cincinnati (Ohio), 1983.

  77. Foo Y.P., Takefuji Y., Stochastic Neural Network for Solving Job Shop Scheduling, Proc. of the IEEE 2nd Conf. on Neural Networks, San Diego, June 1988

  78. Forrester, J.W. (1958). Industrial Dynamics: a major breakthrough for decision makers, Harvard Business Review, Vol.36(4), pp.37-67.

  79. Foster T. A.; "It pays to measure performance: logistics performance compensation programms"; Chilton’s Distribution 90, September 1991.

  80. Fujimoto R. M., "Time Management in The High Level Architecture", SIMULATION, June 1998.

  81. Fujimoto R., Parallel and distributed simulation, Proceedings of the 1999 Winter Simulation Conference, pp 122 – 131, IEEE Piscataway, New Jersey

  82. Gan B. P., Liu L., Turner J. S., Cai W., Distributed parallel Simulation of Supply Chain Models, Technical report, University of Singapore, 2000

  83. Gan B. P., Liu L., Turner J. S., Cai W., Jain S., Hsu W. J. Distributed Supply Chain Simulation across Enterprise Boundaries, Proceeding of the 2000 Winter Simulation Conference, pp 1245 – 1251, Florida

  84. Gan B. P., Liu L., Turner S. J., Cai W., Distributed parallel simulation of supply chain models, Article, 5th UKSim, 2001

  85. Gan B. P., Low Y. H., Lim C. C., Jain S., Bottleneck based modelling of semiconductor supply chains, International conference on modelling and analysis of semiconductor manufacturing, 2000

  86. Gan B. P., Low Y. H., Lim C. C., Jain S., Cai W., Hsu W. J., Huang S. Y., Turner S. J., Parallel discrete event simulation of a supply chain in semiconductor industry, HPC, ASIA 2000

  87. Gan B. P., Low Y. H., Lim C. C., Jain S., Cai W., Hsu W. J., Huang S. Y., Turner S. J., A parallel discrete event simulation of wafer fabrication process, Technical Report University of Singapore, 1999

  88. Gan B. P., Turner J. S., Cai W., Adapting a supply chain simulation for HLA, DS-RT 2000, USA

  89. Gan B. P., Turner J. S., Cai W., Hierarchical Federations: an architecture for information hiding, PADS, 2001, USA

  90. Gan B. P., Turner J. S., Cai W., Ji Z., Managing event traces for a web front-end to a parallel simulation, Report, University of Singapore, 2000

  91. Gan B. P., Turner J. S., Cai W., Xavier P., Visualization of a distributed semiconductor supply chain simulation, European simulation interoperability workshop 2001, UK

  92. Ganeshan, R., e Harrison, P.T. (1995). An introduction to supply chain management, Penn State University.

  93. Garetti M., A. Pozzetti, R. Tavecchio, "Production scheduling in SMT electronic boards assembly",Production Planning & Control, vol. 7, n. 2, 1996

  94. Garetti M., Macchi M. (2000). "Manufacturing systems modelling and enterprise modelling: do they need to be integrated?" Information tecnology for business management. 16° World computer congress 2000, Beijing, China, August 21-25.

  95. Garetti, A. Bartolotta, E. Corradi, M. Rabe, A. Raimondo "Design issues of an integrated software workbench supporting the manufacturing systems design process", in Plonka F., Olling G. (eds.),Computers Application in Production and Engineering, IFIP, Chapman & Hall, 1997

  96. Genesereth, M.R., and Ketchpel, S.P. (1994). Software Agents, Communications of the ACM, Vol. 37, No.7.

  97. Geraghty R., Joyce S., Moriarty S., Noone G., Joyce S. "COM-CORBA Interoperability", Prentice Hall ISBN 0130962775

  98. Giribone P., Bruzzone A.G. & Tenti M. (1996) "Local Area Service System (LASS): Simulation Based Power Plant Service Engineering & Management", Proc. of XIII Simulators International Conference, New Orleans LA, April 8-11

  99. Gnoni M.G., Integrazione e coordinamento nella gestione della supply chain, Atti del XXVII Convegno ANIMP-OICE-UAMI, Trieste, 12-13 ottobre 2000.

  100. Gnoni M.G., R. Iavagnilio, G. Mossa, G. Mummolo, Solving a lot sizing and scheduling problem by hybrid modelling, Proceedings of the Third International Workshop of Special Interest Group on Advanced Techniques in Production Planning & Control, Firenze 24-25 Febbraio 2000, Florence Press.

  101. Gopalakrishnan, M., Miller, D.M., Schimdt, C.P., (1995), A framework for modelling setup carryover in the capacitated lot-sizing., Int. J. Prod. Res., Vol. 33, pp. 1979-1988

  102. Green, S., Hurst, L., Nangle, B., Cunningham, P., Somers, F., e Evans, R. (1997). Software Agents: a Review, Intelligent Agents Group Report, http://www.cs.tcd.ie/research_groups/aig/iag/pubreview.zip

  103. Hamilton John A. Jr., Nash David A., Pooch Udo W. "Distributed Simulation", CRC Press ISBN: 0849325900 MISS- UC Chico - HLA Library

  104. Handfield R.B., Nichols E.L. jr; "Introduction to Supply Chain Management"; Prentice-Hall: Upper Saddle River (NJ),1999.

  105. Harker, P.T., e Ungar, L.H. (1996). A market based approach to workflow automation, http://lsdis.cs.uga.edu/activities/NSF-workflow/paper1.html.

  106. Harrington H. J.; "Business process improvement: the breakthrough strategy for Total Quality, Productivity and Competitiveness"; Mc Graw-Hill: New York, 1991.

  107. Hill David (1996) "Object-Oriented Simulation", Addison Wesley, Reading MA
  108. Hopfield J.J., Tank, D.W., Neural Computation of Decisions in Optimization Problems, Biol. Cybernetics, Vol. 52, 1985, pp.141-152

  109. Introduction to the High Level Architecture, UK Simulation Interoperability, Working Group, http://siwg.dera.gov.uk/hla/introduction

  110. J. S. Dahmann, F. Kuhl, R. Weaherly, "Standards for Simulation: As Simple As Possible But Not Simpler The High Level Architecture For Simulation", SIMULATION Giugno 1998.

  111. Jahnukainen J., Lahti M.; "Efficient purchasing in Make To Order supply chain"; Int. J. Production Economics 59 (1999) 103-111, Elsevier: Otakaari 1 (Finland).

  112. Jansen B, Hamilton J, Pooch U. (1997) "Modeling and Simulating an Army Information Support Structure", Proc. of Military, Government and Aerospace Simulation, Atlanta

  113. Jennings, N.R. (1993). Commitments and Conventions: the foundation of co-ordination in Multi-Agent Systems, The Knowledge Engineering Review, Vol.8(3), pp.223-250.

  114. Jennings, N.R. (1996). Co-ordination techniques for Distributed Artificial Intelligence, Foundations of Distributed Artificial Intelligence (O’Hare, G., e Jennings, N., a cura di), John Wiley & Sons.

  115. Kamel, M., e Ghenniwa, H. (1994). Co-ordination of distributed intelligent systems, Soft computing: Fuzzy Logic, Neural Networks, and Distributed Artificial Intelligence (Aminzadeh, F., and Jamshidi, M., Eds.), Prentice Hall, Englewood Cliffs, pp.229-260

  116. Kelton W. D., Law A. M., "Simulation modeling and analysis"; Mc Graw- Hill: New York, 1991.

  117. Kenneth C. Laudon, New York University: "Management Information System organization and Technology in the Networked Enterprise", sixth edition.

  118. Khaw J.F.C., Lim B.S., Lim L.E.N., Scheduling a Group Technology Manufacturing Cell Using a Hybrid Neural Network, Journal of Flexible Automation and Integrated Manufacturing, 1(2), 1993, pp. 105-117

  119. Kim D., Cao H., Buckley S. J., Modelling and simulation of supply chain management based on DEVS and CORBA framework, Proceeding of the 1999 Winter Simulation Conference

  120. Kirkpatrick, S., Gelatt, C.D., e Vecchi, M.P. (1983). Optimization by simulated annealing Science, Vol. 220, No.4598.

  121. Koestler, A. (1991). "The ghost in the machine" Arkana Books, Reading, UK.

  122. Kuhl F., Weatherly R., Dahmann J., Kuhl F., Jones Anita, "HLA: Creating Computer Simulation Systems: An Introduction to the High Level Architecture", Prentice Hall; ISBN: 0130225118

  123. Lea R., Matsuda K, Miyashita K. (1996) "Java for 3D and VRML Worlds", New Riders Publishing, Indianapolis

  124. Lee, H.L., e Billington, C. (1992). Managing Supply Chain Inventory: Pitfalls and Opportunities, Sloan Management Review, Spring 1992, pp. 65-73.

  125. Lim B.S., Khaw J., Lim L., Hybrid Neuaral Networks for Scheduling in a Group Technology Manufacturing Cell, Proc. of the 2nd Int. Conf. On CIM, Singapore, 1991, pp. 828-835

  126. Lin, G.Y.-J. (1992), An opportunistic price-based multiple-resource and part scheduling, Tesi di Dottorato, Purdue University, W.Lafayette, IN.

  127. Lin, G.Y.-J., e Solberg, J.J. (1992). Integrated shop-floor control using autonomous agents, IIE transactions, Vol. 24, No.3.

  128. Lorenz M. 1993, "Object-oriented software development: a practical guide", Prentice Hall Object-oriented series

  129. Lutz R., R. Scrudder, J. Graffagnini, "High Level Architecture Object Model Development And Supporting Tools", SIMULATION, June 1998.

  130. Malone, T.W., e Crowston, K. (1994). The interdisciplinary study of co-ordination, ACM Computer Surveys, Vol. 26(1), pp.87-119

  131. Mandelbrot, B.B. (1982). "The fractal geometry of nature" W.H.Freeman, NY.

  132. Mason-Jones R., Towill D. R., "Total cycle time compression and the agile supply chain"; Int. J. Production Economics 62 (1999) 61-73, Elsevier: Cardiff (UK).

  133. Maturana, F.P., e Norrie, D.H. (1995). A generic mediator for multi-agent coordination in a distributed manufacturing system http://ksi.cpsc.ucalgary.ca/DME/Generic.html.

  134. McConnell J. 1996, "Managing Client/Server Environments: tools and strategies for Building Solutions", Prentice Hall

  135. McCulloch, W.S. (1949). A heterarchy of values determined by the topology of nervous nets Bulletin of Mathematics Biophisics, Vol. 11.

  136. McLean C., Riddick F., Integration of manufacturig simulations using HLA, NIST report, 2000

  137. Menzel C.P., Mayer R.J. (1998) The IDEF family of languages. IN: Bernus P., Mertins K., Schmidt G. Handbook on architectues of information systems. Springer.

  138. Miller J, Nair R., Zhang Z., Zhao H. (1997) "JSIM: A Java-Based Simulation and Animation Environment", Proc. of 30th Annual Simulation Symposium, Atlanta, April
  139. Mosca R, Giribone P., Bruzzone A.G. (1996) "Study of Maritime Traffic Modelled with Object-Oriented Simulation Languages", Proc. of WMC96, San Diego, January 14-17

  140. Mosca R., A.G. Bruzzone, P. Giribone, B. Fassone, "Project Management Tools: Simulation on WEB Enviroment", Proc. SCS Western Multiconference on WEB Based MODELLING & SIMULATION, pagg. 140-145, San Francisco, January 1999.

  141. Mosca R., Giribone P. & Bruzzone A.G. (1996) "Virtual Reality as a Support for Designing Fire-Fighting Standing Operating Procedures", Proc. of Simulation for Emergency Management, New Orleans LA, April 8-11
  142. Mosca R., Giribone P., Bruzzone A.G. (1997) "Application of Experimental Design Methodologies to Management Re-Engineering in Industrial Assembly Department by Using Simulation", Proceedings of 1st World Congress on Systems Simulation, WCSS97, Singapore, September 1-4
  143. Mosca R., P.Giribone & A.G.Bruzzone (1995) "Sensitivity Analysis In Interactive Stochastic Simulators", Proceedings of MIC95, Innsbruck, February 20-23
  144. Mosca R., P.Giribone, A.G. Bruzzone (1997) "Information Technology and Artificial Intelligence to Support Production Management in Industrial Plants", Proceedings of AI97, Innsbruck, Austria, February
  145. Mosca R., P.Giribone, A.G. Bruzzone (1997) "The Potential in the Integration of Tools for Plant Floor Solutions", Proceedings of MIM97, Vienna, Austria, February 3-5
  146. Mosca R., P.Giribone, A.G.Bruzzone (1994) "Graphic, Analog and Statistical Verification of a Computer Simulation of Port Operations", Proceedings of HPC94, San Diego, April 10-15

  147. Murphy P. R., Daley J.; "International freight forwarder perspectives on Electronic Data Interchange and information management issues";Journal of Business Logistics 17, No. 1, 1996.

  148. Newing R.; "Secure Internet transactions at last!";Logistics Management, May 1997.

  149. NIIIP (1996). The NIIIP Reference Architecture. www.niiip.org.

  150. Nof, S.Y. (1994). Critiquing the potential of object orientation in manufacturing. International Journal Computer Integrated Manufacturing, vol. 7, no. 3: 3-16.

  151. O’Brien C., Head M.; "Developing a full business environment to support just-in-time logistics"; Int. J. Production Economics 42 (1995) 41-50, Elsevier: Nottingham university Park.

  152. O’Hare, G., Jennings, N. (a cura di) (1996). Foundations of Distributed Artificial Intelligence, John Wiley & Sons.

  153. Page E. H., Griffin S. P., Rother S. L., Providing conceptual framework support for distributed web-based simulation within the HLA, Proceedings of SPIE, pp 287 – 292. 1998, Orlando

  154. Page E. H., The rise of web-based simulation: implications for the HLA, Proceedings of the 1998 Winter Simulation Conference

  155. Pancani J., Rapaccini M. Tucci M., "Simulation modeling and analysis of an assembly-shop: complexity managed with automatic coding", Proceedings of 2nd Int. Conf. MITIP, 5-6 June 2000, Nectiny (CZ), pp. 90-98, ISBN 80-7082-664-9, pp

  156. Park T. Y., Han K. H., Choi B. K. (1997). An object-oriented modelling framework for automated manufacturing system. International Juornal of computer integrated manufacturing, vol. 10, n.5, pagg. 324-334.

  157. Parunak, H.V.D. (1994). Applications of Distributed Artificial Intelligence in Industry. In: Foundations of Distributed Artificial Intelligence (O'Hare and Jennings, (eds.)), Wiley Inter-Science.

  158. Parunak, H.V.D. (1996). Industrial applications of Multi-Agent Systems, Industrial Tecnology Institute, Ann Arbor.

  159. Parunak, H.V.D., Irish, B.W., Kendrick, J., e Lozo, P.W. (1985). Fractal actors for distributed manufacturing control. Proceedings of the second IEEE conference on artificial intelligence applications, Miami, FL.

  160. Paterson D. J., Anschuetz E., Biddle M., Kotick D., Nguyen T. "Simulation Interoperability Standard Organization Extension of RTI to Construct a Simulator over Distributed PC's", In Proceedings of Spring Simulation Interoperability Workshop 1997

  161. Portioli A., 1997, A Fuzzy approach for the globalization of production activities, in Computer Applications", in Production and Engineering, F. Plonka and G Olling ed. Chapman & Hall

  162. Prasad, B. (1996). Concurrent Engineering Fundamentals: Integrated Product and Process Organisation, Prentice Hall, New Jersey

  163. Pratt D., Kamath M., Delen D.; "A new paradigm for manafacturing enterprise modeling: reusable, multi-tool modeling"; Proceedings of the 1996 winter simulation conference.

  164. PTRM Consulting; "Integrated Supply Chain performance measurement: a multi-industry consortium reccomendation"; Weston, MA: PTRM, 1994.

  165. Quinn F. J.; "What’s the buzz? Supply Chain Management", Part 1; Logistics Management 36 (February 1997).

  166. Rabelo, R.J., e Camarinha-Matos, L.M. (1994). Negotiation in multi-agent based dynamic scheduling, Robotics and computer integrated manufacturing, Vol. 11, No.4.

  167. Ranieri L., Allocazione delle Risorse nelle Produzioni di Tipo Project, Atti del XXVIII Convegno ANIMP-OICE-UAMI, Spoleto, 25-26 ottobre 2001.

  168. Rapaccini M., Tucci M.,"Simulation-based scheduling and allocation of human resources in labour-intensive assembling activities", 4th IFIP WG5.7 Special Interest Group on Advanced Technique in Production Planning and Control, Aalborg (DK), 28-29 August 2001

  169. Richardson H., Bering S., Trunik P., Harrington L.; "New life through logistics"; Transportation & Distribution 37, No. 12, December 1996.

  170. Rogora, C., e Pedone, P. (1995). Supply Chain Integration: strategie per affrontare gli anni 2000, Economia e Management, n.2

  171. RTI programmer’s guide, Technical Report DMSO, 1998

  172. RTI programmer’s guide, ver 1.3, Technical Report DMSO, 1996

  173. Rumbaugh, J., Blaha, M., Premerlani, W., Eddy, F., e Lorensen, W. (1991). Object-oriented modeling and design, Prentice Hall, Englewood Cliffs, NJ.

  174. Schmitz J. M., Frankel R., Frayer D. J.; "ECR alliances: a best practice model"; Joint Industry Project on Efficient Consumer Response, 1995.

  175. Schönsleben P. "With agility and adequate partnership strategies towards effective logistics networks"; Computers in Industry 42 (2000) 33-42, Elsevier

  176. Schulze T., Strasburger S., Klein U., Migration of HLA into civil domains: solutions and prototypes for transportation applications, Simulation, 73:5 pp. 296 – 303, 1999

  177. Schulze T., Strasburger S., Schumann M., Bluemel E., Using HLA and SLX for logistical simulation, www.isg.cs.uni-magdeburg.de, 1999

  178. Schulze T., Strasburger S., Schumann M., Bluemel E., Using HLA for factory simulation, Proceedings of 1998 Fall Simulation Interoperability Workshop

  179. Schulze T., Strasburger S., Schumann M., Menzler H., Distributed traffic simulation based on the HLA, Proceeding of 1998 Simulation Interoperability Workshop Fall, Orlando

  180. Shannon R. E.; "Introduction to the art and science of simulation"; Proceedings of the 1998 Winter Simulation Conference, Volume 1.

  181. Shaw, M.J.P. (1984). The design of a distributed knowledge-based approach for the intelligent manufacturing information system, Tesi di Dottorato, Purdue University, W.Lafayette, IN.

  182. Smith, R.G. (1980). The contract net protocol: high-level communication and control in a distributed problem solver, IEEE transactions on computers, C-29, Vol. 12.

  183. Smith, R.G., e Davis, R. (1981). Frameworks for co-operation in distributed problem solving, IEEE Transactions on Systems, Man, and Cybernetics, Vol. smc-11(1), pp. 61-69.

  184. Stevens, G.C. (1989). Integration of the Supply Chain, International Journal of Physical and Distribution Management, Vol 19, pp. 3-8

  185. Strader T. J., Lin F., Shaw M.J.; "Information infrastructure for electronic virtual organization management"; Decision support systems 23 (1998) 75-94, Elsevier: Urbana-Champaign, Urbana (USA).

  186. Tucci M., Revetria R., Different Approaches in Making Simulation Languages Compliant with HLA Specification, Proceedings of SCSC 2001, Orlando (FL) july 15–19, 2001

  187. URL "Introduction to the High Level Architecture"; UK Simulation Interoperability, Working Group http://siwg.dera.gov.uk/hla/introduction

  188. URL DMSO (Defense Modeling and Simulation Office); http://hla.dmso.mil/

  189. URL Liophant Simulation Club http://st.itim.unige.it/liophant

  190. URL MSIAC, Modeling and Simulation Information Analysis Center http://www.msiac.dmso.mil/

  191. URL Simulation Team http://st.itim.unige.it

  192. URL VV & A, from DoD Department of Defense http://neds.nebt.daps.mil/Directives/5200_40.pdf

  193. URL www.dmso.mil DMSO (Defense Modeling and Simulation Office),

  194. URL www.ecst.csuchico.edu Chico University McLeod Institute (1998), HLA MODULE 1-6,

  195. URL: Sun Microsystems; http://java.sun.com

  196. URL WILD http://st.itim.unige.it/wild

  197. Valkenaers, P., Van Brussel, H., Bongaerts, L., and Wins, J. (1997). Holonic manufacturing systems, Integrated computer aided engineering, Vol. 4, No.3.

  198. Vernadat F.B. (1999). Requirements for simulation tools in enterprise engineering. 15th international conference on CAD/CAM, robotics and factories of the future. Auguas de Lindoia, SP, Brazil, august 18, 1999

  199. Vollmann T.E., Berry W.L., Whybark D.C.; "Manufacturing Planning and Control Systems", 4th edition; Mc Graw-Hill: New York, 1997.

  200. Watson H. J., Frolik M. N.; "A field study of methods for determining information requirements for an EIS"; MIS Quarterly 17, No. 3, September 1993.

  201. Wetherbe J. C., Vitalari N. P.; "Systems analysis and design: best practices", 4th edition; West Publishing: St Paul (MN), 1994.

  202. Wooldridge, M., e Jennings, N.R. (1995). Intelligent Agents: theory and practice, The Knowledge Engineering Review, Vol. 10, No.2.

  203. Wu B. (1995). Object-oriented system analysis and definition of manufacturing operations. International Journal of production research, vol. 33, n.4, pagg.955-974

  204. Zeigler B. (1990) "Object-Oriented Simulation with Hierarchical Modular Models", Academic Press, Boston
http://st.itim.unige.it/wild